Table of Contents
Advertisement
Quick Links
KNOW YOUR PRODUCT
3/8 AIR RATCHET
WRENCH
• 88NM MAX TORQUE
• 180 MAX RPM
• 1/4 NITTO STYLE MALE
CONNECTOR
INSTRUCTION MANUAL
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electrical shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
0721
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Full Boar FBARW-038
Summary of Contents for Full Boar FBARW-038
- Page 1 KNOW YOUR PRODUCT 3/8 AIR RATCHET WRENCH • 88NM MAX TORQUE • 180 MAX RPM • 1/4 NITTO STYLE MALE CONNECTOR INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electrical shock, fire and/or serious injury. Save all warnings and instructions for future reference.
-
Page 2: Specifications
SPECIFICATIONS - MODEL NO. FBARW-038 Max RPM: Max Torque 88nm Drive Size: 3/8 Inch Square Drive Air Inlet: 1/4 Nitto Style Male Connector Operating Pressure: 6.2 bar (90 psi) Maximum Pressure: 10.3 bar (150 psi) Weight: 1.17 kg Air Consumption:... - Page 3 KNOW YOUR PRODUCT 1. 1/4 Nitto Style Male Connector 5. Forward Reverse Select 2. Handle 6. 3/8 Inch Square Drive 3. Grip 4. Trigger...
-
Page 4: Table Of Contents
TABLE OF CONTENTS SPECIFICATIONS............Page 02 KNOW YOUR PRODUCT........... Page 02 INTRODUCTION............Page 05 SAFETY INSTRUCTIONS........... Page 06 SET UP AND PREPARATION........Page 11 OPERATION............... Page 12 MAINTENANCE............Page 14 TROUBLE SHOOTING ..........Page 14 DESCRIPTION OF SYMBOLS........Page 15 CONTENTS.............. -
Page 5: Introduction
INTRODUCTION This 3/8 Air Ratchet Wrench is perfect for automotive and manufacturing applications. Its low profile and lightweight design is ideal for tightening or loosening bolts where space is limited. Featuring a heavy duty harden metal body and ergonomic soft touch grip this dependable tool is built to last. -
Page 6: Safety Instructions
GENERAL AIR TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 1. Work area safety a. - Page 7 GENERAL AIR TOOL SAFETY WARNINGS (cont.) • Please read and observe these operating instructions before using the tool. Basic safety measures should always be strictly followed to protect against damage to the equipment and personal injury to the user or other people working in the vicinity of operation.
- Page 8 AIR RATCHET WRENCH SAFETY WARNINGS WARNING! Disconnect the tool from the air supply before inspecting the air tool. Failure to do so could result in serious personal injury. • Read and understand instruction manual before using. • Always wear impact-resistant eye protection during the operation of the air tool.
- Page 9 AIR RATCHET WRENCH SAFETY WARNINGS • Do not connect tool to pressure that potentially exceeds 150 psi (10.3 bar). • Only use clean, dry and regulated compressed air at 6.2 bar (90psi) • Only technically skilled operators should use the air tool. •...
- Page 10 AIR RATCHET WRENCH SAFETY WARNINGS KNOW YOUR PRODUCT • Hold the tool correctly; be ready to counteract normal or sudden movements and have both hands available. • The ratchet can provide a sudden torque on the handle when the trigger is operated.
-
Page 11: Set Up And Preparation
KNOW YOUR PRODUCT SET UP & PREPARATION WARNING! Ensure the tool is in the off position before connecting to the air supply. Connecting air supply 1. Wrap Teflon tape (not supplied) around the Nitto Style Fitting approximately 4 to 5 times to ensure a leak free seal. 2. -
Page 12: Operation
KNOW YOUR PRODUCT OPERATION WARNING! Ensure that the compressed air does not exceed 150 psi (10.3 bar) while operating the tool. Too high an air pressure and unclean air will shorten the product’s life due to excessive wear, and may be dangerous causing damage and/or personal injury. - Page 13 KNOW YOUR PRODUCT OPERATION General Operating Instructions 1. Attach Impact rated snap on socket to the 3/8 inch square drive. 2. Secure the tool head to the bolt or fastener with a firm grip. 3. Squeeze the trigger to tighten or loosen the bolt WARNING! Do not clamp or hold the trigger with anything other then your hand.
-
Page 14: Maintenance
KNOW YOUR PRODUCT MAINTENANCE General Cleaning • If the enclosure of the tool requires cleaning, do not use solvents but a moist soft cloth only. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. •... -
Page 15: Description Of Symbols
DESCRIPTION OF SYMBOLS Revolutions or reciprocations /min No load speed per minute Wear eye, ear & breathing Wear hearing protection protection Wear breathing protection Wear eye protection Read Instruction Manual Warning CONTENTS 1 x Air Ratchet Wrench 1 x Oil Bottle 1 x 1/4 Nitto Style Male Connector 1 x Instruction Manual CARING FOR THE ENVIRONMENT... -
Page 16: Warranty
WARRANTY YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE (see www.bunnings.com.au or www.bunnings.co.nz for store locations) WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: Australia 1800 951 371 New Zealand 0800 647 840...
Need help?
Do you have a question about the FBARW-038 and is the answer not in the manual?
Questions and answers