Netvue Vigil Quick Manual page 24

Step 4 (Wired Connection):
Read this step if you are using wired connection, otherwise skip to Step 5.
This step requires the skill of making an Ethernet cable. Consult with the
electrician if you are not sure how to do it.
A weatherproof tube is needed for Ethernet cable to avoid leaking water
into Ethernet cable port. Cut off the Ethernet cable at the length you want.
Insert the cable into the weatherproof tube, and carefully attach RJ-45
connector to the cut ends. Test the cable is working before installing.
Things you need:
Bare copper Ethernet cable
RJ45 connector
RJ45 crimping tool
Bare copper Ethernet cable RJ45 connector