Technical Specifications; Copyright Notice - HQ Power BUNDLEBAR VDPLDJBAR8 User Manual

Replacing the fuse
Only replace the fuse by a fuse of the same type and rating.
1. Unplug the device's power cord from the outlet.
2. Use a flat-head screwdriver to remove the fuse holder.
3. Remove the damaged fuse and replace with the same type of fuse.
4. Insert the fuse holder back in its place and reconnect power.
10.

Technical Specifications

power supply
power consumption
LEDs
output
red
green
blue
beam angle
DMX control
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 25/11/2014
VDPLDJBAR8
100-240 VAC, 50/60 Hz
55 W
12 x 9 W tri-colour RGB COB LEDs
620 nm/100 lm
520 nm/100 lm
462 nm/50 lm
15°
3 or 15 channels
910 x 242 x 48 mm
10 kg
10 ©Velleman nv