Advertisement
Brewer Features
FAST & FRESH-BREWED: Coffee made in minutes.
BACK-TO-BACK BREWING: Immediately brew a second cup,
no need to wait for reheating.
TRAVEL MUG FRIENDLY: Accommodates travel mugs up to
7" tall.
SIMPLE BUTTON CONTROLS: Just insert any K-Cup® pod
and use the button controls to brew a delicious cup.
MAINTENANCE ALERT: Reminds you to descale after every
250 brews.
COMPATIBLE WITH THE MY K-CUP® UNIVERSAL
REUSABLE COFFEE FILTER: Brew your own ground coffee
(sold separately).
Auto Off automatically turns your brewer off 5 minutes after
the last brew for energy savings, but will be ready to brew as
soon as it is powered on again.
STRONG BREW for a bolder, more intense cup.
DESCALE MODE: Once in mode, follow guided process to
effectively remove scale from your brewer.
Caring For Your Brewer
Regular cleaning keeps your brewer running smoothly. Always be sure to turn off and unplug your brewer before cleaning.
Brewer Exterior
Keep your Keurig® brewer looking its
best by cleaning the exterior from
time to time. Just clean with a damp,
soapy, lint-free, non-abrasive cloth.
Never immerse the brewer in water or
STR ONG
other liquids.
Drip Tray
The drip tray overflow should be emptied and
cleaned occasionally. To remove, lift
up off brewer base, keeping it level to avoid
spilling. Rinse and clean with a damp, soapy,
lint-free, non-abrasive cloth. Hand wash only.
High Altitude To ensure your coffee maker works properly at
higher altitudes (5,000 feet) please enable the High Altitude
Brewing Mode on your coffee maker.
1. Begin with the brewer plugged in and powered off.
2. Press and hold the POWER button and 10oz button for
3 seconds. The 12oz button will illuminate to confirm that
the High Altitude Brewing Mode has been enabled.
3. High Altitude Mode will remain enabled until steps 1-2
are repeated and the 12oz light turns off and the 8oz light
turns on to confirm that the High Altitude Brewing mode
is disabled.
HIGH ALTITUDE BREWING: While holding the brewer handle
up, push down slowly on the KCup® pod in the pod holder until
the bottom of the K-Cup® pod is punctured by the exit needle.
STRONG BREW MODE: Keeps the Strong feature on with
every brew.
With the brewer plugged in and powered off, press and hold
the STRONG button for 3 seconds (strong will blink twice).
To exit the mode, repeat the same steps.
To turn the strong off for a single brew, press the STRONG
button once until no longer illuminated.
STRONG MODE will be reactivated for the next brew
automatically.
Water Reservoir
The water reservoir should be
cleaned periodically by wiping the
inside of the reservoir and underside
of the lid with a damp, non-abrasive,
lint free cloth. Do not dry the inside
of the water reservoir with a cloth as
lint may remain. Allow the reservoir
to dry completely. Hand wash only.
Advertisement
