Olympus DS-2200 Online Instructions Manual page 43

Recorder buttons that are used to input characters
Button
PLAY Press once
Press and hold
FF Press once
Press and hold
REW Press once
Press and hold
FOLDER ----------
ERASE ----------
INDEX Press once
Press and hold
MENU Press once
Press and hold
Use the two following methods to quickly find characters.
1 When the INDEX button is pressed, the displayed character group (example: Uppercase,
lowercase, template, symbols) will change, and you can then press the FF or REW buttons to
select characters.
2 Every time the MENU button is pressed, it will skip ahead by 5 characters, so you can quickly
move closer to the character you want.
(Currently displayed character) = (Space) = DICT. = TO DO = A = F = K = P = U = Z = a = f =
k = p = u = z = 1 = 6 = , = ( = # = ^ = (Space) = DICT. = TO DO...
If you press the DISPLAY button while a character other than one of the above appears, you will skip to
the closest forward character in the above cycle.
Pressing the DISPLAY button again will then cycle through every fifth character as shown above.
example:
If you press the DISPLAY button while "MEMO" is displayed, "TO DO" will appear.
If you press the DISPLAY button while "B" is displayed, "F" will appear.
Push
To input the selected character and advance the input position.
Confirms folder name or file comment.
Forward to next character in the character list.
Scroll forward through the character list.
Backward to previous character in the character list.
Scroll backward through the character list.
Returns to previous character.
To delete the flashing character.
Switches between character groups (types).
Quickly cycles through the character groups (types).
Selects character to be input: skips ahead by 5 characters.
Quickly skips ahead in increments of 5 characters.
Action
4
43