Number Plate Light - Suzuki Movano Owner's Manual

3. Remove the lamp assembly from
the aperture on the outer side.
4. Detach wiring connector from
lamp assembly.
5. Remove bulb holder from lamp
assembly and renew bulb.
6. Install bulb holder in lamp
assembly and reattach wiring
connector to lamp assembly.
7. Replace lamp assembly into
aperture, ensuring that it is seated
correctly.
8. Replace the nut onto the locating
pin on the rear of the lamp
assembly.
9. Install cover on the inside of the
rear door.

Number plate light

1. Unclip lamp assembly using a flat
blade screwdriver.
2. Detach wiring connector from
lamp assembly.
3. Remove lens cover and renew
bulb.
Vehicle care
4. Install lens cover and attach
wiring connector to lamp
assembly.
5. Install lamp assembly.
Crew Cab, Chassis Cab
1. Remove the two screws from the
lens cover.
2. Remove lens cover and renew
bulb.
3. Install the lens cover and replace
the two screws.
283