Suzuki Movano Owner's Manual page 299

7. Screw the sealant filler hose to the
tyre valve.
8. The rocker switch on the
compressor must be set to
position O.
9. Connect the red < power supply
lead on the compressor to the
jump start terminal 3 304.
Note
Depending on model, the jump start
terminal may be located at the left-
hand or right-hand side of the engine
compartment.
10. Connect the black ] power
supply lead to a vehicle grounding
point, e.g. the engine block or an
engine mounting bolt.
Note
Depending on tyre repair kit type, it
may be necessary to connect the
single power supply lead to the
Vehicle care
power outlet or cigarette lighter
socket.
For this type, the red < and
black ] power supply leads will not
be present.
To avoid discharging the battery,
we recommend running the
engine.
11. Set the rocker switch on the
compressor to position I. The tyre
is filled with sealant.
12. The compressor pressure gauge
briefly indicates up to 6 bar. Then
the pressure starts to drop.
13. All of the sealant is pumped into
the tyre. Then the tyre is inflated.
297