Radio Data System (Rds) - Suzuki Movano Owner's Manual

Table of Contents

Advertisement

148
Infotainment system
Note
Due to signal strength, it is possible
that less than six stations will be
stored.
Recalling a station
Radio 15 USB
Select the desired waveband, then
briefly press station button 1...6 to
recall a stored station.
To recall a station on the autostore list
(AST), while listening to the radio
briefly press SETUP to activate AST
mode. The station previously
selected will be received. Briefly
press station button 1...6 to recall
another stored station on the
autostore list.
Updating stations list manually
Stations can also be stored manually
in the autostore list.
Note
Only available with
NAVI 50 IntelliLink,
NAVI 80 IntelliLink.
To update the list of stations and
obtain the most recent ones, activate
the system update manually.
Depending on Infotainment system,
the sound may be muted during a
manual update.
NAVI 50 IntelliLink
Touch Options, scroll down to
Update List then select Start;
Updating ... appears on the display
until the update is complete.
Note
If DAB is available, it is
recommended to update the DAB
stations list manually when the
system is switched on.
NAVI 80 IntelliLink
From the Home page, touch MENU
then Multimedia, followed by
Settings. Select Radio and scroll
down to Update radio list.
Alternatively (depending on version),
select Multimedia followed by Radio,
and choose any the following modes:
● Preset
● List
● Frequency
Then touch < to open a pop-up menu,
and select Update radio list.

Radio data system (RDS)

RDS is an FM station service that
helps to find the desired station and
ensures its fault-free reception.
Advantages of RDS
● The programme name of the
chosen station appears on the
display screen instead of its
frequency.
● During an automatic station
search, the Infotainment system
tunes into RDS stations only.
● The Infotainment system always
tunes into the best receivable
broadcasting frequency of the
chosen station, by means of AF
(Alternative Frequency).
Radio 15 USB
Configuring RDS
Press SETUP and turn OK to access
the RDS menu. Press knob to select.

Advertisement

Table of Contents
loading

Table of Contents