Connections - Samick SG 500 Owner's Manual

CONNECTIONS

HEADPHONES
Two sets of Headphones can be plugged in for private practice. The sockets are located at the back
of the instrument in left part of the keyboard and allows you to play without disturbing anyone else
or being disturbed by outside noise.
MIDI OUT
The Midi OUT connector transmits Midi data generated by the instrument to other Midi
instruments.
USB TO HOST
It is possible to connect the instrument to a computer using the USB port located in the back panel
of the instrument and control the Midi parameters.
BLUETOOTH
This is the socket where to insert the Bluetooth Receiver unit that allows to connect a Bluetooth
transmitting unit (smart phone, tablet, etc) to the instrument audio system.
AUX IN SOCKETS
There are two inputs (Left and Right) and they are used to send the audio signal of an external
instrument to the internal amplifier.
LINE OUT SOCKETS
There are two outputs (Left and Right) and they are used to send the audio signal to an external
amplifier, mixer console or recording equipment. To connect the instrument in Stereo to an external
amplification system connect both Left and Right outputs.
INPUT LEVEL
This is to control the signal level in Aux In input.