Direct Reset - Samick SG 500 Owner's Manual

RESET – Direct Reset
Your digital piano is a computer and software based. Sometimes your keyboard will stop
functioning properly. As with computers, there can be a "glitch" that can cause a problem. If you
have favorites or registrations stored in memory you will loose them when you perform a reset. You
will then be able to replace them.
If it should be necessary to completely erase the internal RAM memory, a very simple reset feature
is provided.
1 - Make sure that the instrument is switched off.
2 - Press and hold the (+) YES and (-) NO buttons
3 - Switch on the instrument whilst holding the (+) and (-) buttons down.
4 - The display shows Reseting
Do not reset the instrument if is not necessary. All your information you have programmed
will be automatically erased from the internal RAM memory. The factory set programs will
be automatically restored.
BLUETOOTH Connection Procedure
1 Insert the BT1 Receiver in the dedicated socket and the instrument will automatically
play a few notes automatically a to confirm the BT1 is inserted in its slot.
2 When the BT1 receiver is ready, its blue Led will be On and flashing quickly for about
5 seconds. Than it will start flashing at a slower speed after the BT1 will match the
Bluetooth device.
3 Find now the BT1 on the Bluetooth device (smartphone or tablet) and select it to
complete the connection.
4 As soon as the connection is completed, the blue Led will stop flashing to indicate the
two devices are successfully connected.
5 Start playing your audio file from Bluetooth device and have fun.