Chorus Effect; Touch Sensitivity - Samick SG 500 Owner's Manual

- Use the DATA WHEEL to select a different reverb type.
The reverb level for the Main, Left and Layer voices can be changed in the Function menu, please
see the Function section of this manual for more information. (Page 31)

CHORUS EFFECT

The Chorus effect adds the impression of depth and spaciousness to the selected keyboard voice.
Press the CHORUS button to engage the chorus effect and the indicator will light up.
Press the button again to turn off the chorus effect.
There are eight reverb effects available:
1-Chorus1,
5-Flanger1,
- Press the CHORUS button On, so that the chorus type is shown in the display
- Use the +/YES, –/NO buttons or the DATA WHEEL to select a chorus type.
The chorus level for the Main, Left and Layer voices can be changed in the function menu.
Please see the Function section for more information. (Page 32)

TOUCH SENSITIVITY

Just like an acoustic piano, your instrument has an 88 note keyboard with velocity control. This
means the level of the audio signal will be in proportion with the velocity with which the key is
pressed. If you play soft you will have a quiet sound, while if you play very hard you will have a
much louder sound .
Unlike an acoustic piano, you can customized the strength it takes to play this piano effectively, A
younger, weaker hand might prefer a "soft" touch?
The TOUCH button allows you to select 3 different touch sensitivity curves:
1 - HARD
2 - NORMAL
2-Chorus2,
6-Short Delay,
This setting requires the keys to be played quite hard to produce
maximum loudness.
This setting produces standard keyboard response. This is the factory default
mode.
3-Chorus3,
7-Short DelayFb
4-Feedback,
8-Flanger2.