Adjusting The Balance; Keyboard & Display - RIBA R-55 Manual

Adjusting the balance:

When you have a standard weight (available with your
supplier) you can adjust the balance yourself:
* Turn off the balance.
* Take away the protective flap on the bottom of the scale
* Turn on the scale and press the small key 1 time
* "Kg--Lb " appears on the display.
* Press 3 times "Zero / Enter" key
* "L 0.0 Kg " appears on the display.
* Press "Zero / Enter" key The display tells you to put the appropriate adjusting weight on the scale and
and confirm with Zero / Enter button
Place the following weight and confirm with "Zero / Enter" key, place the final weight and confirm again with
press "Zero / Enter "key.
The menu is now complete and the calibration is complete.
Note:
Do not shake the balance
Note:
Keyboard & Display:
NET
Kg/Ib
PCS
© RIBA WEEGTECHNIEK BV
(Zero) Scale is in Zero mode
Scale is in Tare mode
Low Voltage
(Stable) : Scale is in stable mode.
Indicates the current measuring units in weighting mode.
Scale is in counting mode.
20