Advertisement
17
Step 5: Using the EDS file
Search for ABB VFD-GATEWAY and select create. EDS file will need to be installed into the PLC software, to be se-
lected.
(Note: the EDS file MUST be installed through EDS hardware installation tool before it is available to use.)
Note: Use either EDS File or Generic module DO NOT USE BOTH
Step 6 : On the next screen, give the module a name and enter the VFD-GATEWAY's IP address.
(Default is 192.168.0.10. This can be changed from the web page setup)
LVD-EOMU02U-EN REVB 04/2022
Advertisement
