Table of Contents
Advertisement
CHAPTER 1: OVERVIEW
1.4 HARDWARE INSTALLATION
----------
Data Connection
----------
For Host only
----------
Power Delivery
PSU (230 W)
K-lock
60 W
Power On/Off Switch
1. Insert the provided CD into your computer's disc drive and the AutoPlay will be launched automatically. If the AutoPlay does not appear,
locate and double-click on the Setup.exe file in the driver folder. Alternatively you may download the latest drivers for Windows, Mac OS
and Android OS from the following link: http://www.displaylink.com/downloads/
2. Connect the power adapter (PSU) to the DC jack on the docking station.
3. Connect the attached (2) USB-C to C cable to USB-C (upstream) ports (host 1/2) on the docking station and then to an available USB-C
port on host 1/2.
4. Connect your DisplayPort/HDMI displays to the corresponding ports on the docking station.
5. Connect any other devices to the docking station, including an RJ-45 (Gigabit) device for network connection/USB peripherals/
speakers and microphones.
6. Power on the docking station and it is ready to use.
HDMI (DP Alt)
2
1
60 W
1
1
Host switch
by hotkey
Sharing between 1 and 2
**DP Alt mode supported
FIGURE 1-3. HARDWARE INSTALLATION
1.877.877.2269
Dual 4K
1
RJ-45
Display mode
switch button
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
HDMI (DP Alt)
1
Hotkey switch
HDMI (DP Alt)
2
HDMI (DP Alt)
2
HDMI (DP Alt)
1
For Host only
USB peripherals
Dual 4K
1
1
Dual 4K
1
1
Dual 4K
2
2
Dual 4K
2
2
7
Advertisement
Table of Contents
