Installation; Installing The Ethernet Devices - Black Box IC665A Manual

Install the software drivers first, then connect the hardware.
This chapter explains how to install the Docking Station's software and hardware.
Section 3.1 explains how to install the Ethernet device, Section 3.2 discusses how to
install the video drivers, Section 3.3 tells you how to connect the docking station to
your computer, and Section 3.4 describes how to connect devices to the docking
station.

3.1 Installing the Ethernet Devices

To install the Ethernet driver:
1. Insert the provided CD into your disc drive, then locate and double-click the
Setup.exe file under x:\Driver\Ethernet, where x is your disc drive letter.
2. Wait while the programs install the driver. See Figure 3-1.

3. Installation

NOTE
Figure 3-1. Prepare to install screen.
CHAPTER 3: Installation
17