Table of Contents
Advertisement
CHAPTER 4: HOST BRIDGE UTILITY (MAC OS)
4. HOST BRIDGE (KM SHARING) UTILITY (MAC OS)
4.1 LIMITATION
1. The HostBridge Utility does not support a VM simulation system.
2. KM Share Hub only works on USB 3.0/USB 3.1 host ports.
3. If KM Share is operating abnormally on one PC/MAC caused by entering sleep, suspend or restart, unplug both upstream ports,
restart the software on both PC and MAC, and re-plug both upstream ports to restore.
4.2 SETUP AND INSTALLATION
Follow the steps below for the installation.
a. Connect the Host 1 upstream port (on the docking station) to the USB-C port of Host 1, and connect the Host 2 upstream port
(on the docking station) to the USB-C port of Host 2
b. Click KM share to start the installation, as shown below.
c. Click "Continue."
FIGURE 4-1. WELCOME SCREEN
FIGURE 4-2. SELECT A DESTINATION SCREEN
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
17
Advertisement
Table of Contents
