Advertisement
Quick Links
Grow With Me
Grow With Me
PARTS
Bottom Cover - 2
Side Cover - 2
1
Screw
• Turn the track over so you are looking
at the bottom of one end of the track.
• Remove three screws from the end of
the track, as shown.
2
Side Cover
• Lift and remove the bottom cover.
Hint: This will require a lot of force.
• Remove the side cover.
Repair Kit
Repair Kit
End Link - 2
5
#4 x
/
" Screw - 6
8
Shown Actual Size
Screw
Screw
Bottom Cover
RC Rally
™
RC Rally
™
3
Connector
• Remove the connector from the two
pegs as shown.
4
• Remove the end link from the track
as shown.
• Throw away the old bottom cover,
side cover and end link.
5
• Fit the new end link to the track,
as shown.
End Link
New End Link
Advertisement
Related Manuals for Mattel Grow With Me RC Rally Repair Kit
Summary of Contents for Mattel Grow With Me RC Rally Repair Kit
- Page 1 Grow With Me RC Rally ™ Grow With Me RC Rally ™ Repair Kit Repair Kit PARTS Bottom Cover - 2 End Link - 2 Connector Side Cover - 2 #4 x " Screw - 6 Shown Actual Size • Remove the connector from the two pegs as shown.
- Page 2 Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052. For other countries, outside the United States: Canada: call 1-800-567-7724, or write to: Mattel Canada Inc, 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. Great Britain: telephone 01628 500302. Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Need help?
Do you have a question about the Grow With Me RC Rally Repair Kit and is the answer not in the manual?
Questions and answers