Page 1
The system is powered up by pressing any of the push buttons or a press of either of the rotary knobs. A long press of the upper rotary knob will turn the S100 off, Use this method instead of the...
Page 2
Push Button – Rotary Switches The two Rotary switches also have a push button function. The LXNAV S100 detects short or long presses of the push button. A short press means just a click, a long press means pushing the button for more than one second.
Page 3
Counter clockwise rotation will select the previous control. The lower PUSH button ENTERS the selected feature. Faster rotation of the rotary knob will increase the rate at which the value changes i.e. bigger steps in value. The S100 has five operating Modes and the SETUP Page...
Page 4
Setup Mode: For all aspects of the setup of the S100. This is but an introduction to the use of the S100 Vario. For use during competitions, tasking and the finer points of cross country flying, please consult the S100 Manual.
Need help?
Do you have a question about the S100 and is the answer not in the manual?
Questions and answers