Assembling The Lift - JOBO CPE-3 Operating Instruction

The JOBO Lift makes work faster, smoother and simpler. Tanks and drums are filled and
emptied efficiently during rotation. Optimal wetting is achieved. Wet fingers during the
process are a thing of the past! Systems 1500, 2500 and 2800 can be used with cog
Content
Lift unit / mounting plate (black) / lever / rollers / gear / mounting screws / instruction
manual
Fitting of toothed gear
Unscrew the magnetic coupling from the existing CPE processor and screw the toothed gear
provided tightly into position.
(In case you have bought the CPE3 Kit with Lift this point is obsolete.)

Assembling the Lift

Remove mounting plate from lift. Insert the enclosed screws into the mounting plate (3 pcs.)
1
3
5
GB
2
4