Advertisement
Quick Links
Advertisement
Related Manuals for Leaksafe Solutions WaterSwitch3
Summary of Contents for Leaksafe Solutions WaterSwitch3
- Page 1 WaterSwitch3 Installation Instructions...
- Page 2 LEAKSAFE SOLUTIONS WATERSWITCH3 INSTALLATION INSTRUCTIONS WATERSWITCH3 COMPONENTS WaterSwitch3 Valve Control Wireless On/Off Switch with delay function Water Flow Meter Valve Wireless Leak Detection Leak Detection transmitter tape available in 0.3M or 1M lengths and 1.5M connecting cable PAGE 2...
- Page 3 LEAKSAFE SOLUTIONS WATERSWITCH3 INSTALLATION INSTRUCTIONS PROGRAMMING & TEST INSTRUCTIONS 1.1: Programming the WaterSwitch Valve Control Lift and remove the catch cover on the top of the case. Press the catch underneath to release the front panel. If the Water Valve Control is to be mains powered or any other auxiliary connections are to be made, cut out cable paths and connect to terminals as shown in Figure 1.
- Page 4 LEAKSAFE SOLUTIONS WATERSWITCH3 INSTALLATION INSTRUCTIONS 1.3 Water Valve Control – FLOW OR NO FLOW VALVE AUTO CLOSE (Requires installation of a Flow Meter). Set using the DIP switches and Setting Button (Figure 1) and with reference to the tables below.
- Page 5 LEAKSAFE SOLUTIONS WATERSWITCH3 INSTALLATION INSTRUCTIONS 1. 5 Enrolling and testing a Wireless Leak Detection Transmitter or Wireless On/Off switch 1.5.1 Enrolling a Wireless Leak Detection Transmitter 1. Remove the cover from the wireless transmitter. Leave the batteries out. Figure 2.
- Page 6 LEAKSAFE SOLUTIONS WATERSWITCH3 INSTALLATION INSTRUCTIONS 1.5.3 Installing batteries and enrolling a Wireless On/Off Switch 1. Slide backplate of wireless switch down to release the catches. Insert a small flat bladed screwdriver into the openings on the left of the switch and turn gently, the cover will separate from the backplate.
-
Page 7: Installation Instructions
LEAKSAFE SOLUTIONS WATERSWITCH3 INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 2.1 Installing the Motorised Valve and Water Valve Control Install the Motorised Valve as close to the incoming stopcock on the incoming water main as possible, on the property owner’s side. Leaksafe recommend the use of compression joints when installing the Motorised Valve although soldered, speed fit or similar couplings can be used. - Page 8 LEAKSAFE SOLUTIONS WATERSWITCH3 INSTALLATION INSTRUCTIONS 2.5 Assembling Leak Detection tape and connecting cables: Tools required: Crimping plier suitable for securing red pre-insulated terminals (bullet connectors). Figure 6. NB. If lengths of leak detection tape are being daisy chained Leak detection tape components...
- Page 9 LEAKSAFE SOLUTIONS WATERSWITCH3 INSTALLATION INSTRUCTIONS RESETTING AND OPENING THE VALVE AFTER A LEAK ALARM The Water Valve Control will shut the valve on the incoming water main or pipe if a leak detection tape is in contact with water, or if the No Flow or Continuous Flow set times are exceeded.
-
Page 10: Indicators And Alarms
LEAKSAFE SOLUTIONS WATERSWITCH3 INSTALLATION INSTRUCTIONS 3.4 Manual override on the Motorised Valve Figure 8. Manual To manually operate the valve, lift and turn the operating operating button button (Figure 8). When the valve is open the red line in the... - Page 11 LEAKSAFE SOLUTIONS WATERSWITCH3 INSTALLATION INSTRUCTIONS QUICK USER GUIDE 1. Turning water ON or OFF using the WaterSwitch Valve Control To turn the water ‘ON’, press the ‘WATER ON’ button on the WaterSwitch Valve Control you will hear a beep and the valve will open.
- Page 12 Leaksafe Solutions Limited Unit C Rose Court, 89 Ashford Road, Bearsted, Maidstone, ME14 4BS, United Kingdom Tel: 0344 848 0488 Web: www.leaksafe.com Email: info@leaksafe.com Version 1 - December 2021...