Before Your Run - Nike + SportBand User Manual

Before Your Run

Downloading and Installing
the Nike+ Utility
Before you start, you must
download and install the Nike+
Utility in your computer.
Important: Do not connect the Nike+
SportBand Link to the USB port of your
computer until you download and install
the Nike+ Utility. (fig.10)
1. Go to www.nikeplus.com/downloads
2. Download the Nike+ Utility Installer.
3. Launch the Nike+ Utility Installer, then
follow the instructions.
Connecting and Charging the Link
After the Nike+ Utility is installed,
take the Link out of the SportBand
and connect it to a USB port on your
computer. The Nike+ Utility will launch
automatically. (fig.11)
When you connect the SportBand Link
to your computer, the battery will begin
to charge. For best results, charge it for
about 2 hours or until the battery icon
shows that the battery is fully charged.
Note: Only one SportBand Link can be
managed at a time.
The Nike+ SportBand User's Guide
fig.10
nikeplus.com/downloads
fig.11
7