Nike SPORTBAND Test Instructions
  1. Manuals
  2. Brands
  3. Nike Manuals
  4. Household Appliance
  5. Nike+ SportBand
  6. Test instructions
Nike SPORTBAND Test Instructions

Nike SPORTBAND Test Instructions

Hide thumbs Also See for SPORTBAND:
1
2
3
4
5
6

Advertisement

Table of Contents

NIKE SPORTBAND
TEST INSTRUCTIONS
JANUARY 16
TH
, 2008

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPORTBAND and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nike SPORTBAND

Summary of Contents for Nike SPORTBAND

  • Page 1 NIKE SPORTBAND TEST INSTRUCTIONS JANUARY 16 , 2008...
  • Page 2 IMPORTANT NOTES: BATTERY CHARGING: The SportBand will need to be charged. The SportBand will run for 3 hours on a full charge. Plug the device into USB for 5 hours to completely charge the device. DISPLAY: The EUT are pre-production prototypes.
  • Page 3 TESTING MODES: There are 7 different modes for testing the device. Press the top bottom to cycle between modes. OFF: This is the default state of the device when it has been removed from USB charging CWHI- Constant Wave High: the device transmits a steady carrier wave at 0 dBm TRHI- Transmit High: The device transmits data packets at 0 dBm...
  • Page 4 OFF: This is the default state of the device when it has been removed from USB charging CWHI- Constant Wave High: the device transmits a steady carrier wave at 0 dBm TRHI- Transmit High: The device transmits data packets at 0 dBm...
  • Page 5 REHI- Receive High: The device is in receive mode at 0 dBm. To send data to the SportBand tap the Emped on a hard surface. The display will blink each time the SportBand receives a data packet. CWLO- Constant Wave High: the device...
  • Page 6 TRLO- Transmit High: The device transmits data packets at -5 dBm RELO- Receive High: The device is in receive mode at -5 dBm. Press the top button one more time to return to OFF mode.

Table of Contents