Nike + SportBand User Manual page 17

Checking Your Metrics
During your run, press the Toggle button (on the side) to cycle through your distance,
pace, time, calories burned, and then go back again to distance. (fig.25)
Note: If you have not entered your weight in the User tab on the Nike+ Utility, your Nike+
SportBand will display "----" in place of the numbers of calories burned, while recording
your run.
Pausing and Resuming a Run
During a run, Press the Record button on the top to put the recording on pause. (fig.26)
When you pause a recording, the bar at the bottom of the screen will stop animating,
and the numbers will blink. You can still cycle through run metrics using the Toggle
button (on the side).
To resume recording, press the Record button again. The numbers will stop blinking and
the bar will animate along the bottom of the display.
fig.25
The Nike+ SportBand User's Guide
fig.26
press to
pause
press to
resume
17