After Your Run - Nike + SportBand User Manual

After Your Run

Reviewing Your Runs
The Review loop that happens after a run
ends on the TIME screen, showing you the
current time of day. Press the Toggle button
(on the side) to see again a review of your
LAST run (the loop will play twice then stop
at your distance). Press Toggle again to see
your weekly miles or kilometers (Sunday at
12:00am to Saturday at 11:59pm). Push the
Toggle button one more time to see the total
miles recorded on your SportBand. One more
push of the Toggle button will take you back
to the time of day. (fig.31)
1. From the current time display, press the
Toggle button (on the side) once to review
your last run. The word LAST will appear,
followed by your most recent run info:
distance, pace, time, then calories burned.
It cycles through these run metrics twice,
then stops at distance. (fig.32)
2. To review the distance you've run in the
past week (Sunday at 12:01am to Sunday
at 12:00am), press the Toggle button (on the
side) again. The word WEEK appears, followed
by your distance. (in miles or kilometers, fig. 33)
3. To review the total number of miles recorded,
press the Toggle button one more time. The
letters TOTL, short for total, appears, followed
by your total miles or kilometers recorded with
the SportBand so far. (fig.34)
Viewing the Current Time
The SportBand also functions as watch.
Press the Toggle button (on the side) to cycle
through the three review screens of your
workouts until you get to the current time.
Note: To make adjustments to the time, refer
to the User tab settings in the Nike+ Utility.
The Nike+ SportBand User's Guide
fig.31
fig.32
x2, loops twice
fig.33
weekly
distance
fig.34
total
distance
toggle
19