Convenient Operations And Setups; Clerk Control Function; Clerk Sign On And Sign Off - Casio TE-100 User Manual

Convenient Operations and Setups

This section describes more sophisticated setups and operations that you can use to suit the needs of your retail
environment.

Clerk control function

Clerk name printing on receipt/journal, and sales amounts summing by clerk.

Clerk sign on and sign off

Any time you begin any registration, clerk sign on operation is necessary.
Clerk sign on
Signing clerk 1 on:
Signing clerk 2 on:
Signing clerk 10 on:
Clerk sign off
Signing clerk off:
• The current clerk is also signed off whenever you set the mode switch to OFF position.
Important!
• The error code "E08" appears on the display whenever you try to perform a registration, a read/
reset operation without signing on.
• The signed on clerk is also identified on the receipt/journal.
Changing OPEN key to CLK-# key
Refer to the "Programming compulsory and clerk control function" section on page 45.
42
E
OPERATION
1 o
6
2 o
6
10 o
6
OPERATION
0 o
6
REG /RF/
CAL / X / Z
Mode Switch
RECEIPT
— Clerk name/consecutive No.