Casio TE-100 User Manual page 15

11.
About special rounding...
Besides cut off, round off and round up, you can also specify "special rounding" for subtotals and totals
or changes. Special rounding converts the right-most digit(s) of an amount to "0" or "5" to comply with
the requirements of certain areas.
1 Special Rounding 1
Last (right-most) digit
0 ~ 2
3 ~ 7
8 ~ 9
2 Special Rounding 2
Last (right-most) digit
0 ~ 4
5 ~ 9
3 Special Rounding 3
Last (right-most) digits
00 ~ 24
25 ~ 74
75 ~ 99
4 Special Rounding 4 (Danish Rounding)
With Danish rounding, the rounding method applies to subtotals depends on whether you
finalize the transaction by inputting an amount tendered or not.
• When a finalization is performed without
an amount tendered entry
Last (right-most) 2 digits
of subtotal
00 ~ 12
13 ~ 37
38 ~ 62
63 ~ 87
88 ~ 99
5 Special Rounding 5 (Australian Rounding)
Last (right-most) digit
0 ~ 2
3 ~ 7
8 ~ 9
• Partial tenders (payments): for Danish Rounding
No rounding is performed for the amount of tendered nor for the change amount due when the customer makes a partial
tender. When a partial tender results in a remaining balance within the range of 1 through 12, the transaction is finalized
as if there was no remaining balance.
• Display and printing of subtotals: for Danish and Australian Rounding
s
When you press the
up to apply an add-on tax rate, the add-on tax amount is also included in the subtotal that is printed and displayed.
Important!
When you are using Danish rounding, you can use the a key to register tendered amount
in which the last (right-most) digits are 00, 25, 50 or 75. This restriction does not apply to the
h and k keys.
Rounding result
2
0
2
5
2
10
Rounding result
2
0
2
10
Rounding result
2
0
2
50
2
100
Rounding result
2
00
2
25
2
50
2
75
2
100
Rounding result
2
0
2
5
2
10
key, the unrounded subtotal is printed and shown on the display. If the cash register is also set
Examples:
1.21
1.26
1.28
Examples:
1.12
1.55
Examples:
1.24
1.52
1.77
• When a finalization is performed with
an amount tendered entry
Last (right-most) 2 digits
of change due
00 ~ 12
13 ~ 37
38 ~ 62
63 ~ 87
88 ~ 99
Examples:
1.21
1.26
1.28
1.20
1.25
1.30
1.10
1.60
1.00
1.50
2.00
Rounding result
2
00
2
25
2
50
2
75
2
100
1.20
1.25
1.30
15
E