Download Print this page
Russell Hobbs RHHV45 Instructions And Warranty

Russell Hobbs RHHV45 Instructions And Warranty

High velocity pedestal fan

Advertisement

Quick Links

INSTRUCTIONS/WARRANTY
MODEL: RHHV45
HIGH VELOCITY PEDESTAL FAN
1
INTRODUCTION
Thank you for purchasing the Russell Hobbs RHHV 45 High Velocity Pedestal Fan.
Each unit has been manufactured to ensure safety, reliability & ease of use. Before use,
please read these instructions carefully and keep them for future reference.
CONNECTING TO POWER
Should the need arise to change the fitted/moulded plug, follow these instructions:
Mains (AC) Operation
This unit is designed to operate on 230V current only. Connecting to
other power sources may damage the unit.
Connect three-pin plug as follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow = Earth
Blue = Neutral
NOTE:
This appliance is a class two product and as such does not have an
Earth wire. Please follow the above instructions leaving out the connection for
the Earth wire.
IMPORTANT SAFEGUARDS
When using your Russell Hobbs fan, basic precautions should always be followed,
including the following:
Make sure the power used corresponds to the one indicated on the rating label.
Use the fan only for needed use as described in this instruction manual.
Brown = Live
2

Advertisement

loading
Need help?

Need help?

Do you have a question about the RHHV45 and is the answer not in the manual?

Questions and answers

Summary of Contents for Russell Hobbs RHHV45

  • Page 1 INTRODUCTION Thank you for purchasing the Russell Hobbs RHHV 45 High Velocity Pedestal Fan. Each unit has been manufactured to ensure safety, reliability & ease of use. Before use, please read these instructions carefully and keep them for future reference.
  • Page 2 ASSEMBLY INSTRUCTIONS To reduce the risk of electrical hazards, it is recommended not to use an extension Your Russell Hobbs Fan has been boxed semi-assembled to minimize packaging cord or plug adaptor. waste. Each part fits together easily and can be later removed for cleaning and SAVE THESE INSTRUCTIONS storage.
  • Page 3 2 long screws (50mm) with washers and nuts – this is to secure the fan Your Russell Hobbs fan control has three speed settings. The various speed settings head onto the neck. assist in regulating the airflow from the fan: b.
  • Page 4 and blade have dried completely. Do not plug fan into electrical outlet until it has been W A R R A N T Y fully re-assembled. Amalgamated Appliances (Pty) Limited (“the Supplier”) warrants to the original purchaser of this product (“the Customer”) that this product will be free of defects in material and TO STORE: workmanship which under normal, personal, family or household purpose manifest Make sure to disassemble and clean the fan before storing.