Advertisement
OPERATING INSTRUCTIONS
1. The on/off switch is incorporated in the speed control switch on the head of
the fan.
2. Your Russell Hobbs fan control has three speed settings. The various
speed settings assist in regulating the airflow from the fan.
a)
Pull once for low speed and air circulation
b)
Pull twice for medium speed and air circulation
c)
Pull three times for high speed and air circulation
3. The fan can operate in oscillation or static mode;
4. To make the fan head oscillate, push down the Oscillation Knob.
5. To stop the fan head from oscillating pull the Oscillation Knob up.
6. The head of the fan can be adjusted up or down - to do this loosen the
adjusting knob, adjust the fan to the desired angle. To secure tighten the
Adjusting Knob.
CLEANING
1. Before cleaning, always ensure the fan is switched off and disconnected
from the electrical socket.
2. Wipe off dust and dirt with a warm moist cloth and then buff with dry cloth.
3. Do not immerse the fan in water or other fluids.
PROBLEM SOLVING
There are no user serviceable parts in this appliance. If the appliance is not
operating correctly, please check that:
1 You have followed the instructions correctly.
2. The unit has been wired correctly and the wall socket is switched on
3. The mains power supply is ON.
If the appliance still does not work:
In the first instance, consult your retailer for possible repair or replacement. If your
retailer fails to solve your problem and you need to return the appliance, make sure
that:
1. The unit is packed carefully and complete into its original packaging.
2. Proof of purchase is attached.
3. Give the reason why you are returning it.
If the supply cord is damaged, it must be replaced by the manufacturer or its
Service Agents in order to avoid a hazard. If service should become necessary
within the warranty period, the appliance should be returned to an approved
Amalgamated Appliances Pty Ltd service center. Servicing outside the warranty
period is still available, however this will be chargeable. If the power supplies cord
becomes damaged the manufacturer or an approved service agent must replace it.
PLEASE AFFIX YOUR PROOF OF PURCHASE/RECEIPT HERE
IN THE EVENT OF A CLAIM UNDER WARRANTY THIS RECEIPT MUST BE
PRODUCED.
5
Advertisement
