Basic Setup; What You Will Need Before You Begin; Erify S Ystem R Equ Irem En Ts - NETGEAR RangeMax WPN311 User Manual

This section describes how to install your NETGEAR RangeMax™ Wireless PCI Adapter
WPN311 and set up basic wireless connectivity on your Wireless Local Area Network (WLAN).
Advanced wireless network configuration is covered in
manual.
Note: Indoors, computers can easily connect to 802.11 wireless networks at distances of
several hundred feet. Because walls do not always block wireless signals, others from
outside your immediate area could access your network. It is important to take
appropriate steps to secure your network from unauthorized access. The NETGEAR
RangeMax™ Wireless PCI Adapter WPN311 provides highly effective security
features which are covered in
Deploy the security features appropriate to your needs.

What You Will Need Before You Begin

You need to verify that your computer meets the minimum system requirements and identify the
wireless network configuration settings of the WLAN where you will connect before you can
configure your wireless pc adapter and connect.
Verify System Requirements
Before installing the NETGEAR RangeMax™ Wireless PCI Adapter WPN311, please make sure
that these minimum requirements have been met:
• Pentium ® III class computer with an available PCI slot
• CD drive
• 20 Mbytes of free hard disk space
• Some versions of Windows may ask for the original Windows operating system installation
files to complete the installation of the WPN311 driver software
B a sic S e tu p
Chapter 4, "Configuration"
"Enabling Wireless Security Features" on page
Chapter 3

Basic Setup

in this
4-8.
3 -1