Connecting The Casio Bn Unit To Pc - Casio BN-10 Service Manual & Parts List

4-2. Connecting the CASIO BN Unit to PC

Important!
Be sure to turn off the power of both your BN Unit and computer before connecting them. Failure to do
so can result in damage to the BN Unit, your computer, or the Mini Cradle.
1. Plug the connector at the end of the Mini Cradle´s cable into your computer´s serial port (RS-
232C).
• The serial port is normally labeled COM1, COM2, COM3, or COM4.
• If the serial port on your computer does not match the Mini Cradle´s connector, you need to
purchase an adaptor. See the documentation that comes with your computer for details.
To connect the Mini Cradle to the CASIO BN Unit
1. Make sure that the power of both the BN Unit and your computer is turned off.
2. Open the Mini Cradle port cover on the left side of the BN Unit as shown in the illustration.
Open
— 25 —