Specifications - Technics SL-100C Operating Instructions Manual

Specifications

General
Power supply AC 110 - 240 V, 50/60 Hz
Power 8.0 W (ON)
consumption Approx. 0.2 W (OFF)
Dimensions 453 x 169 x 372 mm
(W×H×D)
Approx. 9.9 k g
Mass
Operating 0 °C to +40 °C
temperature
range
Operating 35 % to 80 % RH
humidity range (no condensation)
Turntable section
Drive method Direct drive
Motor Brushless DC motor
Turntable platter Aluminum diecast
Diameter: 332 mm
Weight: About 2.0 k g
(including rubber sheet)
1
Turntable speeds 33-
0.18 N·m (1.8 k g ·cm)
Starting torque
Build-up 0.7 s. from standstill to
1
characteristics 33-
Braking system Electronic brake
Wow and flutter 0.025 % W.R.M.S.
/ rpm, 45 rpm, 78 rpm
3
/ rpm
3
Tone arm section
Type Static Balance
Effective length 230 mm
Overhang 15 mm
Tracking error Within 2° 32'
angle (at the outer groove of
30 cm record)
Within 0° 32'
(at the inner groove of
30 cm record)
Offset angle 22°
Arm-height 0 – 6 mm
adjustment range
0 – 4 g (direct reading)
Stylus pressure
adjustment range
Head shell weight Approx. 7.6 g
5.6 – 12.0 g
Applicable
14.3 – 20.7 g
cartridge weight
range (including the head shell)
Shell terminal ø1.2 mm 4 pin terminal
Cartridge section
Type VM type
Output voltage 4.0 mV (1 kHz, 5 cm/sec.)
6.1 g
Mass
1.8 to 2.2 g (2.0 g standard)
Stylus pressure
Specifications are subject to change without
notice.
23