Advertisement
Specifications
— General
Power supply:
Power consumption:
Dimensions:
(WXHXD)
Weight:
@ Turntable section
Type:
Drive method:
Motor:
Drive control method:
Turntable platter:
Turntable speeds:
Pitch control:
Wow and flutter:
Rumbie:
@ Tonearm section
Type:
Effective length:
Overhang
Tracking error angle:
Offset angle:
Stylus pressure
adjustment range:
Applicable cartridge
weight range:
Headshell weight:
—@ Cartridge section
Type:
Frequency response:
Output voltage:
Channel separation:
Channel balance:
Compliance (dynamic):
Stylus pressure:
Load impedance:
Weight:
Replacement stytus:
~110-120/220-240 V, 50 or 60 Hz
3 Ww
43 X 10.6 X 37.5 cm
(16-15/16" X 4-7/32" X 14-3/4")
Maximum height when top
(dust cover) is open.
43 X 37 X 42 cm
(16-15/16" X 14-9/16" X 16-17/32")
4.2 kg (9.3 lb.)
Automatic turntable
Auto return
Auto stop
Belt drive
DC motor
F-G servo control
Aluminum die-cast
Diameter 30.4 cm (12 inches)
33-1/3 rpm and 45 rpm
6% adjustment range
0.045% WRMS
(JIS C5521)
+0.06% peak (IEC 98A Weighted)
—70 dB (IEC 98A Weighted)
Universal tonearm
"S$" shaped tubular arm
Static balanced type
230 mm (9-1/16")
15 mm (19/32")
Within 2°32' at the outer groove
of 30 cm (12") record
Within 0°32' at the inner groove
of 30 cm (12") record
22°
0—2.5g
(See page 1)
8g
Moving magnet
10 Hz to 35 kHz
20 Hz to 10 kHz +1 dB
2.5 mV at 1 kHz
5 cm/s. zero to peak lateral
velocity
(7 mV at 1 kHz 10 cm/s. zero to
peak 45° velocity [DIN 45 500])
22 dB at 1 kHz
Within 1.8 dB at 1 kHz
10 X 10° cm/dyne at 100 Hz
1,75 £0.25 g (17.5 £2.5mN)
47 kQ to 100 kN
5 g (cartridge only
EPS-25CS
Equivalent replacement
stylus: EPS-25ES
Specifications subject to change without notice.
Weight and dimensions shown are approximate.
Advertisement
