Jilong 29P414DE Manual page 42

Step 5. Attach the drainage valve connector to the drain outlet by turning connector
in a clockwise direction.
Step 6. Open the out drain plug on the inside of the pool and the water will begin to
drain immediately.
Step 8. Replace the out drain plug on the inside of the pool.
Step 9. Be sure that the pool liner is completely dry before folding the pool for
long-term storage. Leaving the pool exposed to sunlight for a few hours will clean
and speed the drying process and make it easier to fold the pool for storage. (Never
attempt to fold or stow a pool that is not completely dry as this could lead to a
proliferation of mold or mildew build-up during the time the pool is in storage.)
Step 10. Remember, proper off-season storage is critical to protect your investment
in your pool.(espeically in winter) Once drained and dry, your pool should be
carefully folded and wrapped in a ground cloth (if available) or other similar
protective tarp-like material. The pool and all applicable accessories such as the
pump, cover, ground cloth, ladder, hoses, clamps, and hardware should be kept
together and stored indoors, in a reasonably warm, dry and weatherproof location.
6.1 Folding instruction
Before folding, it's better to dry all parts and pool completely by lying them in the
sun for one hour or so.(PIC.1). And then, spread some talcum powder to prevent
the vinyl from sticking together.
Step 1. Please fold the protrusion sides inside to gain rectangle shape. (PIC.2).
Step 2. Fold each half of the rectangle to gain a smaller rectangle shape. (PIC.3).
Step 3. Fold each ends backwards. (PIC.4).
Step 4. Fold the rest ends together to create an ultimate rectangle one. (PIC.5).
TIPS 1.
TIPS 2. The original packing can be used for storage.
PIC.1
PIC.5
13
MSP-30116-V01
PIC.2 PIC.3 PIC.4