Advertisement
Download TimeTrax™ Software
Type pyramidtimesystems.com/v5 into your internet browser.
1
2
Print and follow instructions on the "DESCRIPTION" tab.
NOTE: Software installation may take 15 minutes or longer.
Swipe Cards (25)
FEATURED RESOURCES
User Guides
Product Brochures
Product Catalog
Videos
INDUSTRY APPLICATIONS
1
Go to pyramidtimesystems.com/support/videos/timetrax.
2
Click on TimeTrax™ Time & Attendance V5 Software/Start-up video.
3
Follow set-up instructions.
Mount Terminal
6
TTEZ Terminal
TimeTrax™
Part #41302
SUPPORT
FAQs
Tutorials
Glossary
What you will need.
Customer Support
Downloads
Upgrades
Product Registration
Warranty & Return
Videos
Tape Measure
To mount terminal.
Contents
•
Install mounting brackets with tabs. Using
provided mounting screws and drill template.
Be sure the four metal tabs are facing upward.
•
Additional holes are provided if mounting onto
an electrical box.
•
Push terminal onto mounting bracket aligning
four tabs on bracket with four matching slots
on back of terminal.
the terminal serial number before mounting,
slide terminal downward until locking tab
TTEZ Quick
Start Guide
clicks into place. When properly mounted,
terminal cannot be removed from the bracket
without using the included wall bracket release
key to disengage locking tab.
•
Cables may be rooted through channel at base
of terminal or by drilling a hole in the rectan
Power
gular section of the mounting bracket and
Supply
through the wall for concealing cables.
To detach terminal.
•
Insert key (tab facing outward) into narrow slot
RJ45 Cable
located on bottom of terminal to right of cable
access cutout.
•
Push key all the way up into slot. Key will slide
easily until last ½ inch until some resistance
from locking tab is felt.
•
With key fully pushed into slot, slide the termi-
nal up and off mounting bracket.
Pencil
Be sure to write down
RJ45/USB
Connector
Phillips Head
Screw Driver
Mounting
Hardware
Security Bracket
& Key
Power Drill
(Optional)
Advertisement
