Napoleon PTH38PSS, PTH38PCP, PTH38PGM Instructions Manual page 7

NOTE: Assembly of this heater requires
basic mechanical skills. Proper assembly
is the responsibility of the installer.
Step 3 ---- Attach Head Assembly to Post
Load head assembly by inserting gas hose
into post.
Insert head assembly into post.
Tighten securely using M4 X 8 Bolts (5 pcs)
and 4mm washers (5 pcs).
Step4 ---- Attach Double Pointed Bolt to
Head Assembly
Attach M6 X 70 double pointed bolts (3 pcs) and
6mm washers (3 pcs) to the top of head assembly
and tighten the bolts securely.
Step 3
4
Step 4
7
ASSEMBLY ASSEMBLY
3
13
12
5
10
16
3