Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Total TIWLI20010
Summary of Contents for Total TIWLI20010
- Page 1 BATTERY IMPACT GUN TIWLI20010...
-
Page 2: Security Instructions
Security instructions Caution Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electrical shock, fire, and/or serious injury. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 3 4) Use and care of the battery tool a. Recharge the battery only with the charger specified by the manufacturer. An unsuitable charger can create a fire hazard. b. Use power tools only with specifically designated batteries. Use of other batteries may create a risk of injury or fire.
-
Page 4: Additional Security Warnings
Safety rules for correct use Please read the instruction manual before use. CE conformity. Wear safety glasses, hearing protection and a dust mask. Waste electrical products must not be disposed of with household waste. Please recycle at the appropriate facilities. Check with your local authority or retailer for recycling advice. -
Page 5: Other Risks
Other risks Even when the power tool is used as prescribed, it is not possible to eliminate all residual risk factors: a. Health defects resulting from vibration emission if the power tool is used for a longer period of time or if it is not managed and maintained properly. b. -
Page 6: Other Warnings
Other warnings Save these instructions Attention Do not let comfort or familiarity with the product (gained from repeated use) replace strict adherence to safety rules for the product in question. Incorrect use or non-compliance with the safety rules indicated in this instruction manual can cause serious personal injury. -
Page 7: Product Description
Tips for maintaining maximum battery life 1. Charge the battery cartridge before it is fully discharged. Always stop tool operation and charge the battery cartridge when you notice less power from the tool. 2. Never recharge a fully charged battery. Overcharging shortens battery life. 3. - Page 8 Remaining battery capacity indication 1. Indicator lights 2. Check button Press the check button on the battery cartridge to indicate the remaining battery capacity. The indicator lights come on for a few seconds. Indicators remaining capacity Switched on >80% 30% to 80% <30% Note: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity.
- Page 9 "OFF" position when released. Electric brake This tool is equipped with an electric brake. If the tool does not stop quickly after releasing the switch trigger, have the tool repaired by an authorized Total dealer. Front light 1. light Pull the switch trigger to turn on the light.
- Page 10 1. Button Impact Force Modification 1. Hard 2. Soft 3. Button Impact strength grade Application max hits Purpose displayed on the panel example Tighten wood Squeeze when strength High screws, tighten and speed are desired bolts Tighten with less force Tighten small Under to avoid breaking the...
- Page 11 Specifications of each grade of impact force Impact strength grade max hits Application displayed on the panel Squeeze when strength Assembly of the High and speed are desired steel structure Tighten when you need fine adjustment with a Furniture assembly small diameter screw The impact force can be changed in 2 steps: hard, soft.
- Page 12 Installation or removal of impact socket Attention Make sure that the impact socket and mounting part (square drive) are not damaged before installing the impact socket. After inserting the impact socket, make sure it is securely fastened. If it comes off, don't use it. 1.
- Page 13 The appropriate tightening torque may vary depending on the type or size of the screw, the material of the part to be fastened, etc. The relationship between tightening torque and tightening time is as follows. Proper tightening torque for standard screw 1.
-
Page 14: Maintenance
To maintain the safety and reliability of the product, repairs and any other type of maintenance or adjustment must be carried out with original spare parts and by official Total distributors. A replacement of non-original parts could cause injury to the machine and the operator. -
Page 15: Exploded View
Exploded view... - Page 16 BATTERY IMPACT GUN...
Need help?
Do you have a question about the TIWLI20010 and is the answer not in the manual?
Questions and answers