Tronic Slim SAFETY Keep the manual accessible These instructions form an integral part of the furniture lock. ■ Keep these instructions with the ■ Please include these instructions furniture lock. if you sell the furniture lock or ■ Ensure that the instructions are pass it on.
Page 3
Safety Avoid risk of explosion ■ Store the furniture lock and Risk of property damage as a The furniture lock is not suitable for its components in the original result of incorrect cleaning use in areas where there is a risk of ex- packaging in a dry and and maintenance.
Tronic Slim INSTRUCTIONS Multiuser mode TO CLOSE: TO OPEN: Open and close by 4-digit code. The code is erased every time the lock is opened, being available for a new use. Single User mode TO OPEN: TO CLOSE: The latch closes automatically after 2 seconds.
Page 5
Change the User code PRESS FOR 3 SECONDS Current code New code 1. Press Enter for 3 seconds. 3. Introduce New code 2. Introduce Current code and press enter. and press enter. Open using Master code: Inspection mode/Delete User code -30S INSPECTION TO OPEN:...
Page 6
Tronic Slim INSTRUCTIONS Change the Master code PRESS FOR 3 SECONDS Current master code New master code 1. Press Enter during 3 seconds. 3. Introduce New master code 2. Introduce Current master code and press Enter. and press Enter. Open using electronic Master Key...
Programmable settings (management software and cable required) AUTOMATIC OPENING TIME: ACOUSTIC SIGNAL VOLUME: CODES: The lock will open automatically ■ High/Low/Off ■ User / Master at the programmed time: ■ hh : mm LED INDICATION LAST EVENTS ■ Mon, Tue, Wed, Thu, Fri, Sat, Sun OF CLOSED POSITION: BATTERY LEVEL ■...
Tronic Slim INSTRUCTIONS Batteries replacement 1. Torx 20 IMPORTANT: 2. The batteries replacement must be done in less than 5 minutes. The BATPACK must remain connected ( make sure to use the USB-C adaptor ) during the release of the batteries (otherwise the clock will loose the programmed time).
Need help?
Do you have a question about the Tronic Slim and is the answer not in the manual?
Questions and answers