Setup Instructions; Height Adjustment - Probasics BSCWB Manual

Congratulations on purchasing a quality ProBasics
Chair. Our shower chairs offer stability, comfort and easy
assembly. Please be sure to read these instructions and
warnings thoroughly and follow the instructions of your
healthcare provider to maximize the shower chair's benefits
and your safety.
DO NOT ATTEMPT TO ADJUST OR OPERATE
THIS SHOWER CHAIR WITHOUT READING ALL
ASSEMBLY INSTRUCTIONS
Remove the shower chair components from all packaging
including tape, cardboard and plastic. Check all parts for
damage before use. If any parts are missing or damaged,
DO NOT
attempt to use the shower chair. If you do not
understand the manual, contact your dealer for a complete
explanation of the instructions, cautions and warnings.
Otherwise injury may result.
NOTE: DO NOT

SETUP INSTRUCTIONS

A
3. Repeat for the remaining 3 leg attachments.
4. Attach the backrest (BSCWB only) by depressing push pins
and sliding backrest bars into frame until push pins snap
into place.

HEIGHT ADJUSTMENT

1. Insert legs into the leg frames by depressing push pins,
sliding legs over receptacle.
2. Depress the height adjustment button and slide the lower
leg upward or downward until the height adjustment
button is fully engaged in the desired setting.
3. Repeat for other three leg attachments.
4. To ensure legs are locked into place, push down on seat or
pull gently on each leg.
INSTRUCTIONS CAREFULLY.
use excessive force when installing any parts.
1. Remove seat frame, legs and back
support (BSCWB only) from carton.
2. Turn seat upside down on a stable work
surface. Insert leg into the leg frame by
depressing push pins, sliding leg over
receptacle until the push pin snaps into
place. An audible click will be heard
(Fig. A).
Shower
®
3