Crestron DM-NUX-L2 Getting Started

DM-NUX-L2 and DM-NUX-R2
USB over Network with Routing
Getting Started
Scan the QR code to view the Quick Start Guide.
www.crestron.com/docs/9043
For information on the Crestron® DM-NUX-L2, visit
www.crestron.com/model/6511319.
For information on the Crestron® DM-NUX-R2, visit
www.crestron.com/model/6511320.
Certification and Compliance
Regulatory Model: M201947001
Federal Communications Commission (FCC)
Compliance Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment
l
and receiver.
Connect the equipment into an outlet on a
l
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
l
technician for help.
Industry Canada (IC) Compliance Statement
CAN ICES-3 (B)/NMB-3(B)
As of the date of manufacture, the product has
been tested and found to comply with
specifications for CE marking.
Product Information - 9042B
2057773
09.21