Crestron AirMedia AM-USB-WF Quick Start Manual

AM-USB-WF/AM-USB-WF-I
AirMedia® USB Adapter with Wi-Fi® Connectivity
The Crestron® AM-USB-WF and
use of Miracast® projection technology with the AM-200 and AM-300
presentation systems and the CCS-UC-1 Crestron Mercury® UC
Tabletop Conferencing System. Miracast is built into the Microsoft®
Windows® 10 operating system, so no software installation is necessary.
NOTES:
The AM-USB-WF and AM-USB-WF-I are functionally identical.
l
The AM-USB-WF-I model is sold outside of the United States. In
this document, the term "AM-USB-WF" denotes both versions of
the product.
The AM-USB-WF and AM-USB-WF-I were previously sold under
l
different names. References to an AirMedia® USB Adapter with
Wi-Fi® Connectivity in other documentation concern the product
described in this Quick Start.
When using the AM-USB-WF or the AM-USB-WF-I with the
l
AM-200 or AM-300, the ZUMMESH-AVBRIDGE,
ZUMMESH-KP10AMBATT, and
ZUMMESH-PIR-OCCUPANCY-BATT are not supported.
AM-USB-WF-I USB dongles enable the
In the Box
1 AM-USB-WF, AirMedia® USB Adapter with Wi-Fi®
Connectivity (U.S.)
or
1 AM-USB-WF-I, AirMedia® USB Adapter with Wi-Fi®
Connectivity (International)
Required Firmware
The AM-USB-WF is compatible with the following firmware:
CCS-UC-1 version 1.4095 or later
l
AM-200 and AM-300 version 1.4213 or later
l
The latest firmware for each device can be found at
www.crestron.com/firmware.
1