Ebyte E78-868LN22S User Manual page 26

E78-864LN22S
Command
character
CRX1DELAY
(Set the number
of times sent)
Command
character
CSAVE
(Save MAC
parameter
settings)
Command
character
CRESTORE
(Restore MAC
default
<RX1DRoffest>,<RX2DataRate>,<RX2Frequency> See the Lorawan
protocol for details.
Example AT+CRXP=1,1,471000000
OK
Precautions Need to be set before sending data. Use the default value when not setting.
Command
Command Format
Type
Test AT+CRX1DELAY=?
command
Query AT+CRX1DELAY?
command
Setting AT+CRX1DELAY=<Delay>
command
Parameter
Delay: how long to open rx1 window after sending, unit: s;
Description
Return
Delay: how long to open rx1 window after sending, unit: s;
value
AT+CRX1DELAY=2
description
OK
Example
Set how long the rx1 window will open after sending, and set before sending
Precautions
data. It is the protocol default value when not set.
Command
Command Format
Type
Test
AT+CSAVE=?
command
Setting AT+CSAVE
command
Parameter <MType>: 0: unconfirm package, 1: confirm package.
Description <value>: is the maximum number of transmissions, ranging from 1 to 15;
Return <MType>: 0: unconfirm package, 1: confirm package.
value <value>: is the maximum number of transmissions, ranging from 1 to 15;
description This command saves the configuration parameters to EERPOM/FLASH
After executing the AT+RESET command, the module will use the new
Example
MAC configuration parameters for network initialization and operation.
Precautions Need to save before sending data
Command
Command Format
Type
Test AT+CRESTORE=?
command
Setting AT+CRESTORE
response
+CRX1DELAY:"Delay"
OK
+CRX1DELAY:<Delay>
OK
OK
response
+CSAVE
OK
OK
response
+CRESTORE
OK
OK
26