Ebyte E78-868LN22S User Manual page 18

E78-864LN22S
Command
character
CJOIN
(Set Join)
<status>：
00 – No data operation
01 – Data transmission
02 – Data transmission failed
Parameter 03 – Data sent successfully
Description 04 – JOIN succeeded (only in the first JOIN process)
05 – JOIN failed (only in the first JOIN process)
06 – The network may be abnormal (Link Check result)
07 – Successful data transmission, no
08 – Send data successfully, with
Return AT+CSTATUS?
value +CSTATUS=03
description OK
Example Query the current status of the device
Command
Command Format
Type
Test AT+CJOIN=?
command
Query AT+CJOIN?
command
AT+CJOIN=<ParaValue1>，
Setting
[ParaValue2],....
command
[ParaValue4]
Parameter <ParaTag1>， [ParaTag2]，......[ParaTag4]：Authentication parameter tag：
Description 1， 2，......4 ；
[ParaValue1]， [ParaValue2]，......[ParaValue4]：Authentication parameter
value: 1， 2，......4；
<ParaTag1>, indicates that the JOIN operation is performed, ，ParaTag1
Ranges：
0– stop JOIN
1– start JOIN，Restart the JOIN process again. For modules that enable hot
Return start, performing this action clears the saved JOIN context parameters.
value [ParaTag2] Indicates whether the automatic JOIN function is enabled.The
description factory value is 1， ParaTag2 value range：
0 – turn off automatic JOIN
1 – The automatic JOIN. module automatically starts JOIN after entering the
transparent mode.
[ParaTag3]indicates the JOIN period,Range of values： 7~255, The unit is s.
Factory default: 8。
downstream
downstream
response
+CJOIN:<ParaTag1>,[ParaTag2],...[Para
Tag4]
OK
+CJOIN:<ParaValue1>,[ParaValue2],...[
ParaValue4]
OK
If the input is legal, first return OK, then
start automatic authentication and return
the authentication result.
+CJOIN:OK Authentication succeeded
+CJOIN: FAIL authentication failed
18