Download Print this page

Motorola Lifesyle Plus User Manual page 2

Motorola lifestyle plus pager user's guide

Advertisement

SETTING THE TIME
F
To set the time, press
until
R
played then press
. The hours digit (represented by
the grey characters in the sample shown below)
begins to blink.
12:00a
• Set the hours digits by pressing
hour is displayed along with the appropriate
p
A.M.) or
(for P.M.) symbol. Keep pressing
cycle through the hours from A.M. to P .M. When
the correct hour (A.M. or P .M.) is displayed, press
F
to advance to the minutes digits.
• The first digit of the minutes (represented by the
grey character) begins to blink. Press
the first digit of the minutes. Press
the second digit of the minutes. Press
the second digit of the minutes. Press
time to leave the time setting function.
8:00a
• All portions of the time-of-day screen, except the
:
colon (
) stop blinking. The clock is now set and
the pager is in the standby mode.
LOCKING A MESSAGE
To lock a message (protect it from being overwritten
F
or erased), press
while the message or timestamp
=
screen is displayed.
is displayed in the upper, right-
hand corner of the screen to indicate the message is
locked. Up to 5 messages can be locked in memory.
555-1212 A
First Screen of a Locked Message
01 12:46p
Second Screen of a Locked Message
To unlock a message, follow the procedure used to
lock it. The lock symbol disappears from the mes-
sage and timestamp screens.
ERASING MESSAGES
The "Erase All" function deletes all read, unwanted
messages from memory.
F
To erase messages, press
until
R
played, then press
. All read, unlocked messages
are removed from memory. All unread and locked
messages are moved to the first memory slots and
carry the new message slot number.
Note: You must read a message before it can be
erased.
setI Trime
is dis-
R
until the correct
a
(for
R
to
R
to change
F
to advance to
R
to change
F
one more
5
E
erase all
is dis-
7
RECEIVING AND READING YOUR MESSAGES
When a message is received, the pager gives an
audible vibrate alert for 8 seconds. The number of
unread messages is displayed. The alert automati-
cally stops, or you can reset the pager by pressing
any of its buttons.
1 page
1 Unread Message Indicator
3 pages
3 Unread Messages Indicator
R
To read your message, press
• The first screen of your message is displayed. To
"freeze" your message, press and hold
viewing it. The pager automatically advances to the
next screen of the message, or you can view it by
R
pressing
. The continuation symbol (
there are additional screens.
555-1212
First Screen of a Message
The screen following your message is the timestamp
screen. It shows the time the message was received
and the message slot number (the order that the
message was received).
01 12:46p
The pager returns to the standby mode.
6
SELECTING AN ALTERNATE FREQUENCY
Synthesized and Auto-Synthesized Models:
F
• Press
until your choice of
quency designator is displayed (for example:
1
f1
f2
f3
,
,
,
).
• To view alternate frequencies, press
scan
or the frequency designator you wish to
F
select is displayed, press
to "lock in" the new fre-
quency or mode.
confirm
• When
is displayed, press
your selection.
STANDARD FEATURES
Time of Day/Standby Screen: The time of day is dis-
played while the pager is in the standby mode.
Time Stamp: The time of day that each message was
received is displayed on a separate screen following
the message.
Memory Capacity: The pager can store up to 16
messages or a total of 160 characters. Individual
messages can be up to 10 characters in length.
Message Protect/Lock: Up to 5 individual messages
can be locked in memory so they will not be overwrit-
ten by new messages or discarded during the "Erase
All" function.
Hold Full Indicator: You can selectively protect up to
5 messages by locking them in memory. When an
attempt to lock more than 5 messages is made
full
is displayed for two seconds indicating the mes-
sage cannot be protected.
Reminder Chirp: When an unread message is stored
in memory, the pager gives a reminder chirp (short
beep) every two minutes. Vibrate models emit a short
8
.
R
while
B
) indicates
B
scan
mode or fre-
scan
R
. When
R
to activate
hold

Advertisement

loading