Advertisement
Table of Contents
ASSEMBLY INSTRUCTIONS:
Item No: STT15008
1.
Place the lamp base on a level surface.
Screw the socket assembly into the base.
Pull balance of cord from base to tighten excess.
2.
Insert the harp until it sits firmly into the saddle.
3.
Adjust the knurl nut on harp. This can be
used to raise the shade a little if necessary.
4.
Place the shade over the end of the harp and tighten
with the finial securing the shade in place.
5. Insert 75Watt bulb into bulb socket.
Uses (1) Maximum 75WATT Type "A" Bulb or (1)
Maximum 18Watt CFL bulb. (Bulb not included).
Cleaning of your lamp
Unplug lamp, wipe with damp cloth.
Do not use abrasives.
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
Revision 07/06/16
Advertisement
Table of Contents
Related Manuals for Springdale Lighting STT15008
Summary of Contents for Springdale Lighting STT15008
- Page 1 ASSEMBLY INSTRUCTIONS: FOR RETURN SHIPPING PURPOSES: PLEASE RETAIN ORIGINAL PACKAGING Item No: STT15008 TO MINIMIZE DAMAGE. Place the lamp base on a level surface. Screw the socket assembly into the base. Pull balance of cord from base to tighten excess.
- Page 2 PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL INSTRUCIONES DE ASAMBLEA: Modelo# STT15008 IMPAQUETADO ORIGINAL PARA REDUCIR DAÑOS MINIMO. 1. Coloque la base de la lámpara sobre una superficie plana. Atornille el conjunto de casquillo en la base. Tire de la balanza de cable desde la base para apretar en exceso.
Need help?
Do you have a question about the STT15008 and is the answer not in the manual?
Questions and answers