Casio ClassPad 300 PLUS User Manual page 243

k Generating a Summary Table by Specifying All of the Values for
In both of the previous examples, summary table generation is performed using View
Window settings to calculate values for
x
generation method, -values are not calculated automatically.
It is up to you to use a LIST variable to specify all of the
table.
In the example below,
used to generate a summary table.
u ClassPad Operation
(1) On the Basic Format dialog box, select "list1" for the [Summary Table] setting, and
specify the value you want for [Cell Width Pattern]. This example uses a [Cell Width
Pattern] setting of "4 Cells".
• For details about Basic Format settings, see "14-3 Setup Menu Settings".
(2) Input the function
• Generation of summary tables is supported for "
• Clear the check boxes of all other functions on the Graph Editor window, if necessary.
Select the check box next to
• If the check boxes of more than one "
lowest line number (
(3) Tap O and then [List Editor] to display the List Editor window.
3-4-14
Using Table & Graph
x
that satisfy the function
x
-values will be stored in a LIST variable named "list1", which is then
y x 3 x
= – 3 on the Graph Editor window.
y x 3
= – 3
y
y y y
1, 2, 3, etc.) is used for number table generation.
20050501
f x
(
x
-values that appear in the summary
y
=" type functions only.
x and press E.
=" type functions are selected, the one with the
x
) = 0. With this table