Casio ClassPad 300 PLUS User Manual page 318

Recursive and Explicit Form of a Sequence
(7) Configure View Window settings as shown below.
xmin = 0
ymin = –15
(8) After everything is the way you want, tap [OK].
(9) Tap the down arrow button next to #, and then select + to create the table.
(10) Perform one of the following steps to draw the type of graph you want.
• To draw a connect type graph, tap $.
• To draw a plot type graph, tap !.
In the above example, "4 Cells" is selected for the [Cell Width Pattern] setting on the
[Cell] tab of the Basic Format dialog box (page 14-3-3).
6-3-4
xmax = 6 xscale = 1
ymax = 65 yscale = 5
20050501
xdot: (Specify auto setting.)
ydot: (Specify auto setting.)