Canon EOS 7 Service Manual page 32

9-5 Imprinting color:
9-6 Imprinting confirmation: None
9-7 Imprinting brightness:
9-8 QD power source:
10. Power Source
10-1 Batteries:
10-2 Battery check:
10-3 Main switch:
11. Camera Specifications
11-1 Custom Functions:
11-2 Camera back:
11-3 Camera orientation
detection switch:
11-4 Flash contacts:
Orange
Automatically set to suit DX-coded film speed.
One CR2025 lithium battery (3 V) housed on the inside
of the QD back.
* The date is reset when the battery is replaced.
Two CR123A lithium batteries (6 V) loaded through the
camera grip bottom.
Automatic battery check when the Command Dial is
released from OFF.
Battery level is always indicated on the LCD panel in one
of four levels.
Keep spare bat-
Battery OK
teries handy
Command Dial set to OFF turns off camera.
Thirteen Custom Functions (C.Fn-1 to C.Fn-13, 34
settings) provided.
* Settable with the Command Dial turned to C.Fn.
* For details, see the Custom Functions table on page 1-37.
Opened with the camera back latch.
* Film window provided.
* No film memo holder.
* Not detachable.
Provided.
X-sync direct contact on hot shoe.
* Speedlite locking pin hole provided.
* No PC terminal.
1-25
Part 1: General Information
Replacement warning Replace batteries
(Shutter release not locked.) (Shutter release is locked.)