Unitech EA630 Plus User Manual page 46

● Power Save Mode
Tap to enable the power save mode to set the WLAN module to its optimum
power consumption setting.
● Roaming Trigger
(Default : -76 dBm, Range : -10 dBm ~ - 120 dBm)
Roaming trigger will help users to look for a better and stronger signal
strength (in dBm) by scanning many access points. When the signal
strength is lower than roaming trigger value, roaming trigger will start to look
for better access points.
● Roaming Delta
( Default : 5 dB, Range : 0 dB ~ 30 dB)
Based on roaming delta value, the device will roam to a better signal
strength access point.
● Roaming Scan Period
The device will stay with the current AP based on the roam period value
before it roams to a different AP.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
(Default : 0 ms, Range : 0 ms ~ 60 sec)
29
© 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
EA630 Plus User's Manual