Related Manuals for Innodisk SATADOM-SH 3SE Series
Summary of Contents for Innodisk SATADOM-SH 3SE Series
- Page 1 3SE Series Customer: Customer Part Number: Innodisk Part Number: Innodisk Model Name: Date: Innodisk Customer Approver Approver...
-
Page 2: Table Of Contents
SATADOM-SH 3SE Table of contents LIST OF FIGURES ............................... 6 1. PRODUCT OVERVIEW ............................7 1.1 I SATADOM-SH 3SE ................7 NTRODUCTION OF NNODISK 1.2 P RODUCT IEW AND ODELS ....................... 7 1.3 SATA I NTERFACE ........................... 7 2. PRODUCT SPECIFICATIONS ........................... 8 2.1 C APACITY AND EVICE... - Page 3 SATADOM-SH 3SE 4.2 E SATADOM-SH 3SE ..............14 LECTRICAL ONNECTIONS FOR 4.3 D EVICE RIVE ............................14 4.4 P 7 VCC ............................. 14 4.5 P OWER CABLE ............................15 5. PART NUMBER RULE ............................16 Rev 1.3 TPS, Jan., 2015...
- Page 4 SATADOM-SH 3SE EVISION ISTORY Revision Description Date Preliminary First Released May, 2013 Official Release AUG, 2013 Rev. 1.1 Add power cable SPEC. Feb., 2014 Rev. 1.2 Add REACH/RoHS declaration of conformity Dec., 2014 Rev. 1.3 Jan., 2015 Modify TBW based on NAND Flash specifications Rev 1.3 TPS, Jan., 2015...
- Page 5 SATADOM-SH 3SE List of Tables 1: D ABLE EVICE PARAMETERS ............................. 8 2: P ABLE ERFORMANCE ..............................8 3: I SATADOM-SH 3SE P ABLE NNODISK OWER EQUIREMENT ..............8 4: P ABLE OWER ONSUMPTION ..........................8 5: T SATADOM-SH 3SE................... 9 ABLE EMPERATURE RANGE FOR 6: S...
-
Page 6: List Of Figures
SATADOM-SH 3SE List of Figures 1: I SATADOM-SH 3SE ......................7 IGURE NNODISK 2: I SATADOM-SH 3SE B IGURE NNODISK LOCK IAGRAM ................12 3: S IGURE IGNAL EGMENT AND OWER EGMENT .................... 14 Rev 1.3 TPS, Jan., 2015... -
Page 7: Product Overview
SATA III interface can work with Serial Attached SCSI (SAS) host system, which is used in server computer. Innodisk SATADOM-SH 3SE is compliant with Serial ATA Gen 1, Gen 2 and Gen 3 specification (Gen 3 supports 1.5Gbps /3.0Gbps/6.0Gbps data rate). SATA connector uses a standard 7-pin signal segment. -
Page 8: Product Specifications
120 MB/sec 130 MB/sec Write (max.) Note: the information is based on CrystalDiskMark 3.01 with file size 1000MB test patent 2.3 Electrical Specifications 2.3.1 Power Requirement Table 3: Innodisk SATADOM-SH 3SE Power Requirement Item Symbol Rating Unit Input voltage +5 DC +- 5% 2.3.2 Power Consumption... -
Page 9: Environmental Specifications
Table 7: SATADOM-SH 3SE MTBF Product Condition MTBF (Hours) Innodisk SATADOM-SH 3SE Telcordia SR-332 GB, 25°C >3,000,000 2.5 CE and FCC Compatibility SATADOM-SH 3SE conforms to CE and FCC requirements. 2.6 RoHS Compliance Rev 1.3... -
Page 10: Reliability
Serial ATA I 1.5Gbps Serial ATA II 3.0Gbps Serial ATA III 6.0Gbps 2.9 Pin Assignment Innodisk SATADOM-SH 3SE uses a standard SATA pin-out. See Table 8 for SATADOM-SH 3SE pin assignment. Table 8: Innodisk SATADOM-SH 3SE Pin Assignment Name Type... -
Page 11: Mechanical Dimensions
2.11 Assembly Weight An Innodisk SATADOM-SH 3SE within flash ICs, 32GB’s weight is 7 grams approximately. 2.12 Seek Time Innodisk SATADOM-SH 3SE is not a magnetic rotating design. There is no seek or rotational latency required. 2.13 Hot Plug The SSD support hot plug function and can be removed or plugged-in during operation. User has to avoid hot plugging the SSD which is configured as boot device and installed operation system. -
Page 12: Theory Of Operation
Communication with the flash device(s) occurs through the flash interface. 3.2 SATA III Controller Innodisk SATADOM-SH 3SE is designed with ID 107, a SATA III 6.0Gbps (Gen. 3) controller. The Serial ATA physical, link and transport layers are compliant with Serial ATA Gen 1, Gen 2 and Gen 3 specification (Gen 3 supports 1.5Gbps/3.0Gbps/6.0Gbps data rate). -
Page 13: Error Detection And Correction
Innodisk SATADOM-SH 3SE uses a static wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page/block in the flash. This spreads flash media usage evenly across all pages, thereby extending flash lifetime. -
Page 14: Installation Requirements
SATADOM-SH 3SE series with Pin7 VCC. SATADOM-SH 3SE series with Pin7 VCC is designed with a fuse (poly switch 500mA, 6V) on Pin7’s circuit. Such a design could avoid any potential damage to customers’ system. -
Page 15: Power Cable
7, external power must be provided to the SATADOM from the 2pin connector on the side. To have the advantages of SATADOM-SH 3SE series with Pin7 VCC, and to avoid any potential damage to customers’ board designed with VCC power supply, Innodisk suggests that customers MUST design their board with a fuse which should be designed before the SATA socket Pin7 VCC. -
Page 16: Part Number Rule
SATADOM-SH 3SE 5. Part Number Rule CODE Definition Code 1 (Disk) Code 14th (Operation Temperature) C: Standard Grade (0℃~ +70℃) D : Disk W: Industrial Grade (-40℃~ +85℃) Code 2 (Feature set) E : Embedded series Code 15th (Internal control) Code 3 (Form factor) A~Z: BGA PCB version. - Page 17 SATADOM-SH 3SE Appendix Rev 1.3 TPS, Jan., 2015...
- Page 18 SATADOM-SH 3SE Rev 1.3 TPS, Jan., 2015...
- Page 19 SATADOM-SH 3SE Rev 1.3 TPS, Jan., 2015...
- Page 20 SATADOM-SH 3SE Rev 1.3 TPS, Jan., 2015...
Need help?
Do you have a question about the SATADOM-SH 3SE Series and is the answer not in the manual?
Questions and answers