Advertisement
Programming guide
Default IP address: 10.30.6.46
Login Password: algo
Configure the extension and flash pattern using the pages as below:
SIP strobe flash pattern programming
No
Description
15
Classic strobe slow
14
Classic strobe medium
13
Classic strobe fast
12
Flashing
11
Side to side
10
Pulse
9
Steady bright
8
Steady dim
7
Rotating strobe
6
Multi-strobe slow bright
5
Multi-strobe slow dimmed
4
Multi-strobe fast bright
3
Multi-strobe fast dimmed
2
Multi-strobe and dim holdover
1
Rotate slow
0
Rotate fast
The strobe light is intended to be used as informative signalling in conjunction with unified communications systems.
It is not intended to be used as a fire alarm signalling application. When testing or in use, do not look directly at the strobe
light in close proximity when it is operating as vision may be temporarily affected by doing so.
Flashing or rapidly flickering lights can cause seizures with people who suffer from epileptic attacks. It is possible that some flash
patterns of the BTB analogue strobe could trigger a seizure for some individuals under certain conditions.
O ices worldwide
© British Telecommunications plc 2019
Registered office: 81 Newgate Street, London EC1A 7AJ
Registered in England No: 1800000
Application
Wall
Ceiling
High
Intensity/Strobe
Med
Low
Advertisement
